FAQ Page

The Dual Purpose (6XL) and PPE Express (6) models require ducting away from the unit for optimum operation.

Standard:

  • 12 3/8 collar to 12″ duct run. Typically with the total run not exceeding 15′, containing a manual or gate damper or louvre system

Optional:

  • 12-3/8″ collar to 12-10″ reduction to 10″ duct run. Typically with the total run not exceeding 15′, containing a manual or gate damper or louvre system 

For enclosed rooms, door grates or make-up air equal to 900-1000 cfm should exist to allow for fresh air take-up.

Contact Circul-Air for additional information.

As of April 9, 2020 Circul-Air Corp International is operating under the terms of “Essential Services” in the State of Illinois and the Province of Ontario.

Some services are limited in the time and we endeavor to return calls and emails within 48 hrs.

Stay Safe!

 

In the age of Amazon it is expected that most products can be delivered overnight. At Circul-Air Corp we manufacture to order, holding minimum stock levels to keep our costs low, and pass the savings onto our customers and distributors. With that in mind the following delivery can be expected in most situations.

  • Hose and PPE Dryers – 3 to 5 weeks
  • Hose Washers – Currently 9 weeks due to demand
  • Extractors – 3 to 5 weeks
  • Accessories (Except Tilt Top) – 3 weeks

Should you have a larger order or are working through time sensitive deliveries such as Construction, Grant, Emergency or Disaster Response, contact Circul-Air for additional information.

Circul-Air Corp works with a number of carriers in the US and overseas to ensure that your new product reaches its final location in the best condition. Here are a few considerations to be made at the time of ordering and planning:

  •  Hose & PPE Dryers are heavy! A crated PPE Express is 1150 lbs while a Dual Purpose Dryer is 1250 lbs. If a forklift is not available, be sure to request a liftgate.
  • In the US and Canada, typically liftgate service is to the curb / door of station. If additional services are required, be sure to request at the time of order so that these can be factored into your delivery cost.
  •  Unattended vs. Attended sites are different costs for shipping. Most carriers will charge a “final mile” premium for unattended sites, so it is best to ensure that a reliable contact is provided at the time of order. Storage fees for unplanned handling by the carrier can be prevented with adequate planning.

While we strive to maintain a supply of components for historical machines, the RTJ-3 model is over 30 years old in most cases. While a testament to their excellent design, our access to these components is decreasing with time.

What can be ordered:

  • Chains & Sprockets, typically within 4 weeks.
  • Bearing Flanges, small bearings, typically within 5 weeks.
  •  White brushes – Availability varies, but typically a 8 week lead time.
  •  Drive Shafts, typically within 4 weeks.
  •  Motors – Unfortunately we will typically direct you to a local motor rebuild facility as we do not carry these.
  •  Rubber Drive Rollers – As of 2020 we no longer have access to these components.

Dual Purpose Dryer (6XL) (D6XX)

Each dryer is specified at the time of purchase based on the desired electrical configuration. Select the configuration based on the voltage and phase of the facility where the unit will be installed.

D612 – 240V / 1 Ph / 60 Hz

D613 – 208 V / 1 Ph / 60 Hz

D633 – 240 V / 1 Ph / 60 Hz

D634 – 208 V / 3 Ph / 60 Hz

** Note this also corresponds to the Retro Fit Kit selection of model. Contact Circul-Air for other requirements and eligibility of your dryer to be converted. **

PPE Express Dryer (4/5) (E6XX)

Each dryer is specified at the time of purchase based on the desired electrical configuration. Select the configuration based on the voltage and phase of the facility where the unit will be installed.

E612 – 240V / 1 Ph / 60 Hz

E613 – 208 V / 1 Ph / 60 Hz

E633 – 240 V / 1 Ph / 60 Hz

E634 – 208 V / 3 Ph / 60 Hz