| MacQueen Emergency 5 Alarm Fire | Sales Office Locations | |
|---|---|---|
Circul-Air Products
CIRCUL-AIR HEAVY DUTY HARD MOUNT EXTRACTOR
These Circul-Air Hardmount extractors have a rugged and robust design which they are known for within the industry. These extractors allow stations to provide a thorough clean of PPE gear, protecting first responders from hazardous exposure.
See More Details Contact for PricingAdditional Info
An industrial extractor, this heavy duty, hard mounted extractor comes pre-programmed for NFPA
1851:2020 requirements. Requiring additional installation steps this unit rewards the customer with a
rugged industry proven ability to tackle any application.
Dimensions: vary by capacity
- Fully NFPA 1851 compliant
- Stainless steel components
- Offered in various sizes
Frequently Purchased Together
PPE Express 6 Gear Dryer
Series 200A – Rotojet Hose Washer
The Circul-Air Roto Jet Hose Washer is a device that completely eliminates the backbreaking and resource-depleting chore of manually scrubbing down hose. Hose washing is necessary for maximum life and a clean, professional appearance.
See More Details Contact for PricingAdditional Info
- 60-gallon soaking tank
- 30 ft/min of up to 5” hose
- Foot pedal control
- Standard 120V plug
PPE Dual Purpose Dryer
• Fully NFPA 1851 compliant
• Up to 500 ft of 5” hose capacity
• 900 CFM/ 6000 Watts heating
• Ambient Heat Mode
• 10 Year Warranty
Additional Info
After contaminated hose and turnout gear has been thoroughly and safely washed, it is necessary for it to be dried in a quick and safe manner. Circul-Air Drying Cabinets provide a safe and more economical alternative to the cost of towers and the damaging practice of drying on hot pavement or in intense sunlight – both of which have the potential to damage expensive equipment.
PPE Express 2 Gear Dryer
• Fully NFPA 1851 compliant
• Small compact for smaller fire stations
• 1500W of Heating or Ambient Only
• 120V Plug-in
Additional Info
The Circul-Air PPE Express Drying Cabinet provides a safe and effective means of returning Duty Gear to service following the use of your extractor.
Retro Head
• Fully NFPA 1851 compliant
• Replaces all old components of dryer
• 5-year warranty on retro fit head
Additional Info
Our Retrofit Head is a cost effective upgrade prolonging the life of your existing equipment. The Retrofit Head upgrade features a 50% decrease in drying time, and a 50% reduction in energy cost. Our control panel offers various settings for heat drying or an ambient air dry selection.
CAC 2 Tier Portable Hose Rack
Additional Info
Our Racks are conveniently designed to allow for custom sizing at the station and trouble-free assembly. Each tier will store approximately 1000 feet of hose.
CAC 3 Tier Portable Rack
Additional Info
Our Racks are conveniently designed to allow for custom sizing.
CAC Dual Purpose Rack
Additional Info
Our Racks are conveniently designed to allow for custom sizing at the station and trouble-free assembly. Each tier will store approximately 1000 feet of hose yet will not sag under this tremendous load.
CAC Stationary Rack 3 Tier Floor Mounted
Additional Info
The Stationary Rack is a great option if portability is not an issue at your station.
CIRCUL-AIR HEAVY DUTY SOFT MOUNT EXTRACTOR
These Circul-Air Softmount extractors are known for their compact and practical design. With the addition of the Fire Package, stations will be equipped with the ability to thoroughly wash their PPE gear.
See More Details Contact for PricingAdditional Info
This industrial grade soft mount extractor comes pre-programmed for NFPA 1851:2020 requirements. 208-240V options with a simple installation process makes these quality machines a step up from the commercial line.
See Cutsheets for Electrical Options
- Stainless Steel Construction
- NFPA 1851 Compliant, 100 G-Force
- Preprogrammed with Fire Package Wash Modes
- 3 Year Warranty
PPE Express 6 Gear Dryer
• Fully NFPA 1851 compliant
• Dries up to 6 sets of gear
• 900 CFM/ 6000 Watts heating
• Ambient Air Mode
• 10 Year Warranty
Additional Info
The PPE Express 6 drys up to six full sets of PPE. Having your turnout gear ready to go for the next emergency call.
CAC Stationary Rack 3 Tier Wall Mounted
Additional Info
The Stationary Rack is a great option if portability is not an issue at your station.
CAC Stationary Rack 2 Tier Floor Mounted
Additional Info
The Stationary Rack is a great option if portability is not an issue at your station.
Dual Purpose Dryer Boot & Glove Hanger
Dual Purpose Dryer Glove Hanger: Mild Steel 0.19″ diameter rod, chrome plated finish
See More Details Contact for Pricing
Dual Purpose Dryer Gear Hanger
Dual Purpose Dryer Gear Hanger: Mild Steel 0.25″ diameter rod, chrome plated finish
See More Details Contact for Pricing
Dual Purpose Dryer Timer Control Panel Label
Dual Purpose Dryer Timer Control Panel Label (Used with Part # 10800107).
See More Details Contact for Pricing
CIRCUL-AIR EXPRESS SOFT MOUNT EXTRACTOR
A commercial, front load extractor pre-programmed for NFPA 1851:2020 requirements. A soft mount design, this 120V machine offers simple installation and easy usage for stations with space or resource constraints. • Meets NFPA 1851:2020 requirements• Pre-programmed with NFPA 1851 recommended wash cycles• Commercial quality construction and components• 120V power required.• 2-year warranty
See More Details Contact for Pricing